Timer Functions

Pre-programmed running times

Run your Liberty Feature or pond pump with the pre-programmed running times or continually running using the simple controls

Pre-programmed running times

Choose from 2, 3 or 4 hours running of your feature/pump. Select your chosen running preference and let the feature do the rest. It will run from the time you set it, then go off when the time has elapsed. It will then come on again 24 hours from the time you first set it, running at the same time each day.

Continuous running

You have the option to press the ‘on’ button which runs the feature or pump continuously. This will run until you either; turn it off, select another option or the battery runs out.

Control Options

As the range of Liberty features has grown, there are now 2 ways to control the timer functions on your water feature. Some styles will have a remote control whilst others use the new easy power system. You can find out more about using either of these on our how to page

1. Using the Remote Control or Easy Power System to set running times
2. Features & Specification

Using the Remote Control

Some Liberty Features are designed to be turned on/off with the remote control. With dry hands, slide the button cover open and pull up the aerial. Press the time option required.

To replace the battery, unscrew and remove the back of the remote handset. Carefully turn the board over and push the spent battery down and out. Replace the spent battery with 1 new CR2032 battery. Slide the new battery in, making sure the battery positive (+) is face up. Return the board and back and re screw together. This is standard battery which can be purchased at any hardware store or supermarket.

The Remote Control handset is also available as a spares accessory (part number 1052719), so should you lose or damage it, you can replace it.

Using the Easy Power System

Using the yellow button to the left of the powerset you can set your feature to run for 2, 3 or 4 hours. As you press the button the LED's adjacent will light to signal which preset you have selected. The first light sets for 2 hours, second for 3 and third for the full 4 hours.

Remote control battery model  #CR2032 (Lithium battery, 3V).

Easy Power System is built in to your feature and simple to use

Are you looking for a larger feature to keep fish or set up a pond?

Facebook
Where to buy
Subscribe to our Newsletter